📢 Please take a minute to read this personal message from the creator of RailwayModels.uk

Train Tech TTDS5L

DCC Signal (LH Feather) 4 Aspect Outer Distant

Manufacturer catalogue image - please note that pre-release images may be CAD renders or CGI images rather than photographs

Manufacturer description

Colour light signal based on the signals used on modern railways. These signals are quick and easy to install and do not require any soldering.

These signals are pre-built and just need to be inserted into the track using the two prongs attached to the signal. If you have already laid your track you can add wires to them rather than using the prongs. If you have already laid your track, you can add wires to them rather than using the prongs.

These signals are fitted with an illuminated Feather which is controlled using a separate DCC address.

Be sure to read the instructions carefully before attempting to set up this signal.

LED COLOURS

• 1 x Red
• 2 x Yellow
• 1 x Green

SIGNAL DETAILS

• 4 Aspect Outer Distant Signal
• Pre-Assembled LED Stem
• Fitted Feather
• DCC Decoder in Base
• Clips Straight into the Track
• Includes Detailing Pack
• Easy to Follow Instructions

MEASUREMENTS

• HEIGHT 72mm

Catalogue listing

Train Tech DCC Signal (LH Feather) 4‑Aspect Outer Distant, part number TTDS5L, is a colour‑light railway signal designed to replicate modern main‑line signals. The unit comes pre‑assembled with an LED stem and a fitted feather, and a DCC decoder is housed in the base.

Installation is straightforward: the signal can be clipped directly into the track using two built‑in prongs, and no soldering is required. For tracks that have already been laid, wires may be fitted to the signal instead of using the prongs. The feather illumination is controlled via a separate DCC address, and the manufacturer advises that the instructions be read carefully before setup.

The signal displays four aspects: one red LED, two yellow LEDs and one green LED. It includes a detailing pack and easy‑to‑follow instructions. The DCC decoder is located in the base of the unit.

Overall height of the signal is 72 mm.