📢 Please take a minute to read this personal message from the creator of RailwayModels.uk

Train Tech TTDS3L

DCC Signal (LH Feather) 3 Aspect Home Distant

Manufacturer catalogue image - please note that pre-release images may be CAD renders or CGI images rather than photographs

Manufacturer description

Colour light signal based on the signals used on modern railways. These signals are quick and easy to install and do not require any soldering.

These signals are pre-built and just need to be inserted into the track using the two prongs attached to the signal. If you have already laid your track you can add wires to them rather than using the prongs.

These signals are fitted with an illuminated Feather which is controlled using a separate DCC address.

Be sure to read the instructions carefully before attempting to set up this signal.

LED COLOURS

• 1 x Red
• 1 x Yellow
• 1 x Green

SIGNAL DETAILS

• 3 Aspect Home / Distant Signal
• Pre-Assembled LED Stem
• Fitted Feather
• DCC Decoder in Base
• Clips Straight into the Track
• Includes Detailing Pack
• Easy to Follow Instructions

MEASUREMENTS

• HEIGHT 72mm

Catalogue listing

Train Tech DCC Signal (LH Feather) 3‑Aspect Home Distant – part number TTDS3L.
A colour‑light signal modelled on contemporary railway practice, supplied as a pre‑assembled unit.

The signal incorporates a pre‑wired LED stem with red, amber and green lamps and a fitted illuminated Feather. Control is provided by a DCC decoder housed in the base, which operates the Feather via a separate DCC address. Installation is achieved by inserting the two supplied prongs directly into the track; where the track is already laid, wires may be connected in place of the prongs. No soldering is required.

Key specifications: 3‑aspect home/distant operation, height 72 mm, includes a detailing pack and a set of easy‑to‑follow instructions.

Users are advised to read the instruction sheet carefully before fitting the signal.