📢 Please take a minute to read this personal message from the creator of RailwayModels.uk

Back to product list

EFE Rail E81003

Class 313 3-Car EMU 313018 BR Network SouthEast

Manufacturer catalogue image - please note that pre-release images may be CAD renders or CGI images rather than photographs

Prototype Era
Era 8 (1983 to 1994) British Rail Sectorisation

Manufacturer description

Bachmann Europe is delighted to unveil a range of all-new tooling Class 313 and Class 314 Electric Multiple Units from its EFE Rail brand; the first time that any such ‘PEP’ family EMUs have been produced ready-to-run in OO Scale. This model is finished in the iconic multicoloured livery of Network SouthEast.

 

The EFE Rail Class 313/314 is comprised of three highly detailed vehicles featuring precision moulded bodyshells adorned with separate detailing parts and an extensive collection of underfloor equipment and separately fitted pipework.

 

Drive is provided through the centre car, with a coreless motor powering each bogie and mounted within a diecast metal chassis to give a strong drive mechanism and low centre of gravity. This vehicle also houses a Plux22 DCC decoder socket and the close fitting electrically conductive couplings mean that just one decoder controls both motors and the lighting in all three vehicles.

 

MODEL FEATURES:

• EFE Rail OO Scale
• Era 8
• Pristine BR Network SouthEast livery
• Running No. 313018
• Three-car unit comprising car Nos. 62546, 71230 & 62610
• Destination blinds displaying ‘Watford Junction’ & ‘Euston’
• Features ‘North London Lines’ branding
• Equipped with a PLUX 22 DCC Decoder Socket – recommended Decoder item No. 36-570A
• Length 799mm

MECHANISM:

• Coreless motor powering both bogies in centre car
• Diecast metal chassis provides strong driving mechanism and low centre of gravity
• 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing
• NEM coupling fitted at driving cab ends
• Conductive couplings with integral close coupling mechanism at the inner end of driving vehicles and both ends of pantograph vehicle
• Designed to operate on curves of second radius (438mm) or greater

DETAILING:

• Separately applied metal detail parts
• Bogies constructed from multiple components featuring third rail shoe gear where applicable
• Separately fitted underframe components
• Intricately detailed pantograph which can be manually raised up and down
• Detailed interior, with specific variations dependant on class type
• Each model is supplied with an accessory pack

LIGHTING:

• Directional lighting, including illuminated headcode and destination panels
• Cab lighting
• High-intensity headlights where applicable
• Passenger saloon lighting
• Door interlock lights (controllable via DCC)

DCC:

• Plux22 DCC decoder interface – one decoder required per unit
• Pre-fitted with speaker to allow users to fit their own sound decoder

LIVERY APPLICATION:

• Authentic liveries applied to vehicles including interior decoration
• Multiple paint applications employed using BR and corporate specification colours
• Logos, numerals and text added as appropriate using authentic typefaces, logos and colours

 

CLASS 313/314 HISTORY

 

Both the Class 313s and 314s were developments of British Rail’s prototype ‘Standard Suburban Train’, for which three prototype units were built at the start of the 1970s. Designated 2-PEP and 4-PEP, which stood for Prototype Electro Pneumatic, these prototypes spawned a family of units known as the ‘PEP family’. The Class 313 were the very first production units to appear from this family, which eventually spanned five classes and encompassed some 755 individual vehicles.

 

The three-car Class 313s were not only the first production ‘PEP’ units to be built, but were also the first ‘dual-mode’ EMUs, having the ability to collect power from 25kV AC overhead power lines via a pantograph on the centre car, or from third rail shoe gear for 750V DC pick-up. A total of 64 Class 313s were built by British Rail Engineering Limited (BREL) at York Works in 1976-1977. The units were put to work on the Great Northern Inner Suburban lines operating from London Moorgate, and for 10 years they served their intended route before operations spread further afield.

 

The Class 314s comprised a smaller fleet of just 16 three-car units and these were constructed two years after the Class 313 build programme had been completed, once again at BREL York. Unlike their earlier counterparts, the Class 314s went north of the border to work on the then-newly opened Argyle Line. The units collected power from 25kV AC overhead lines only, for which they are equipped with a pantograph on the central PTSO (Pantograph Tourist Second Open) vehicle, and did not have the third rail pick-up of their Class 313 siblings.

Catalogue listing

Model details

Prototype information

^* Class names often change over the lifespan of a locomotive, so this is not necessarily the class name used by the operator in the period modelled.

EFE Rail Class 313 3‑Car EMU (model 313018) is a ready‑to‑run OO‑scale replica of a British Rail Network SouthEast electric multiple unit. The model is produced by Bachmann Europe under the EFE Rail brand and represents the British Rail sectorisation era.

The unit comprises three highly detailed cars (numbers 62546, 71230 and 62610) in the original Network SouthEast livery, with destination blinds showing “Watford Junction” and “Euston” and North London Lines branding. The overall length is 799 mm and it runs on 16.5 mm (OO gauge) wheels to NEM310 and NEM311 standards.

Drive is provided by a coreless motor in the centre car, which powers both bogies and is mounted on a die‑cast metal chassis for low centre of gravity. The model includes a Plux22 DCC decoder socket (recommended decoder 36‑570B) and conductive couplings, allowing a single decoder to control both motors and all lighting functions. A speaker socket is pre‑fitted for optional sound decoders.

Detailing includes separate metal parts, authentic bogie construction with third‑rail shoe gear where appropriate, a manually operable pantograph, and a detailed interior that varies with class type. Lighting features directional headlights, illuminated headcodes, destination panels, cab lighting, passenger saloon lighting and door interlock lights, all controllable via DCC.

The replica reflects the history of the Class 313 family, the first dual‑mode EMUs capable of drawing power from 25 kV AC overhead lines or 750 V DC third rail. Sixty‑four units were built by BREL at York in 1976‑1977 for the Great Northern Inner Suburban lines, and the model captures this heritage in a fully painted and finished form.