DCC Concepts LML-VPSBK

4mm Scale Swan-Neck Lamps Value Pack – Black (2x Wall Lamps, 6x Street/Platform Lamps)

Manufacturer catalogue image - please note that pre-release images may be CAD renders or CGI/AI images rather than photographs

Manufacturer description

Value Pack of super-high quality LED 4mm scale swan-neck lamps in Black (2x wall lamps, 6x street/platform lamps)

Pack Contents

• 6x 4mm scale street/platform lamps with 200mm connection wires
• 2x 4mm scale wall lamps with 200mm connection wires
• 8x Resistor boards – suitable for connection to regulated DC power 6-12V

Installation Advice
Drill the mounting hole using a 2mm drill. Carefully thread the fine wires into the hole, then insert the lamp mounting tube.
If using the extension base, use a 5.5mm drill and insert it to your chosen depth or pre-cut it to length and pre-drill to 2mm to allow you to use the added 2mm tube extension that is provided in the pack.
Wall lamps – using a very small drill, drill the building wall to allow insertion of the fine wires. Use glue to fix the lamp to the building.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
You can also connect Legacy Skyline Lamps to an Alpha Mimic DCC control board if you wish. Follow the instructions supplied with the Alpha Mimic Building Lighting for this type of installation.

Recommended Power Supply – DCP-PS12

Catalogue listing

DCC Concepts 4mm Scale Swan‑Neck Lamps Value Pack – Black (part number LML‑VPSBK) supplies a set of super‑high quality LED lamps suitable for 4mm scale layouts. The pack contains six street or platform lamps and two wall lamps, each supplied with a 200 mm length of connection wire. Eight resistor boards are also included, designed for use with regulated DC power supplies of 6‑12 V.

The lamps are fitted with swan‑neck mounting tubes, and the package provides an extension base for deeper installations. For mounting, a 2 mm drill is required for the standard holes, while the extension base uses a 5.5 mm drill. Fine wires are threaded through the holes and the tubes are inserted; wall lamps may be glued to the building surface after drilling a small hole for the wires.

Resistor boards allow selection of light intensity by trying different resistor values, with the longer of the two wires acting as the positive lead. Any 1/4 watt resistor larger than 1 kΩ may be used, and up to six lamps can be connected to a single board. The lamps can also be integrated with an Alpha Mimic DCC control board according to the Alpha Mimic Building Lighting instructions.

The manufacturer recommends using the DCP‑PS12 power supply for optimal performance.