DCC Concepts LML-VPGMR

4mm Scale Gas Lamps Value Pack – Maroon (2x Wall Lamps, 6x Street/Platform Lamps)

Manufacturer catalogue image - please note that pre-release images may be CAD renders or CGI images rather than photographs

Manufacturer description

Value Pack of super-high quality LED 4mm scale gas lamps in Maroon (2x wall lamps, 6x street/platform lamps)

Pack Contents

• 6x 4mm scale street/platform lamps with 200mm connection wires
• 2x 4mm scale wall lamps with 200mm connection wires
• 8x Resistor boards – suitable for connection to regulated DC power 6-12V

Installation Advice
Drill the mounting hole using a 2mm drill. Carefully thread the fine wires into the hole, then insert the lamp mounting tube.
If using the extension base, use a 5.5mm drill and insert it to your chosen depth or pre-cut it to length and pre-drill to 2mm to allow you to use the added 2mm tube extension that is provided in the pack.
Wall lamps – using a very small drill, drill the building wall to allow insertion of the fine wires. Use glue to fix the lamp to the building.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
You can also connect Legacy Skyline Lamps to an Alpha Mimic DCC control board if you wish. Follow the instructions supplied with the Alpha Mimic Building Lighting for this type of installation.

Recommended Power Supply – DCP-PS12

Catalogue listing

DCC Concepts 4 mm Scale Gas Lamps Value Pack – Maroon (part number LML‑VPGMR) provides a set of high‑quality LED gas lamps designed for 4 mm scale model railways. The pack includes two wall‑mounted lamps and six street or platform lamps, all finished in a maroon colour.

The packaging contains six street/platform lamps with 200 mm connection wires, two wall lamps with 200 mm connection wires, and eight resistor boards suitable for regulated DC power supplies of 6‑12 V.

Installation guidance recommends drilling a 2 mm hole for the mounting tube and threading the fine wires through it. Wall lamps require a small drill hole in the building wall and adhesive to secure the fixture. The longer of the two wires is the positive lead; the resistor board should be connected to the power supply, and the lamp brightness can be adjusted by selecting different resistor values, using any 1/4 W resistor larger than 1 kΩ. Up to six lamps may be tied to a single resistor board. The pack also notes compatibility with Alpha Mimic DCC control boards for legacy skyline lamps. DCC Concepts suggests using the DCP‑PS12 power supply with this product.