Back to product list

DCC Concepts LML-VPGGR

4mm Scale Gas Lamps Value Pack – Green (2x Wall Lamps, 6x Street/Platform Lamps)

Manufacturer catalogue image - please note that pre-release images may be CAD renders or CGI/AI images rather than photographs

Manufacturer description

Value Pack of super-high quality LED 4m mscale gas lamps in Green (2x wall lamps, 6x street/platform lamps)

Pack Contents

• 6x 4mm scale street/platform lamps with 200mm connection wires
• 2x 4mm scale wall lamps with 200mm connection wires
• 8x Resistor boards – suitable for connection to regulated DC power 6-12V

Installation Advice
Drill the mounting hole using a 2mm drill. Carefully thread the fine wires into the hole, then insert the lamp mounting tube.
If using the extension base, use a 5.5mm drill and insert it to your chosen depth or pre-cut it to length and pre-drill to 2mm to allow you to use the added 2mm tube extension that is provided in the pack.
Wall lamps – using a very small drill, drill the building wall to allow insertion of the fine wires. Use glue to fix the lamp to the building.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
You can also connect Legacy Skyline Lamps to an Alpha Mimic DCC control board if you wish. Follow the instructions supplied with the Alpha Mimic Building Lighting for this type of installation.

Recommended Power Supply – DCP-PS12

Catalogue listing

DCC Concepts 4mm Scale Gas Lamps Value Pack – Green (part number LML‑VPGGR) provides a collection of high‑quality LED lamp units designed for 4mm (0:152) model railway layouts. The pack includes six street or platform lamps and two wall lamps, each supplied with a 200 mm length of fine connecting wire. Eight resistor boards are also provided for use with a regulated DC power source of 6‑12 V.

All lamps are finished in green to represent gas lighting and are intended to be mounted using a 2 mm drill hole for the lamp tube. Wall lamps require a small drill through the building façade and can be secured with glue. The longer of the two wires supplied with each lamp is the positive lead; the resistor board allows selection of light intensity by trying different resistor values, with a minimum recommended resistance of 1 kΩ for 1/4 W resistors. Up to six lamps may be connected to a single resistor board, and the lamps can also be linked to an Alpha Mimic DCC control board following the appropriate instructions.

The manufacturer recommends the DCP‑PS12 power supply for reliable operation of the lamp set.