DCC Concepts LML-VPGBN

4mm Scale Gas Lamps Value Pack – Brown (2x Wall Lamps, 6x Street/Platform Lamps)

Manufacturer catalogue image - please note that pre-release images may be CAD renders or CGI images rather than photographs

Manufacturer description

Value Pack of super-high quality LED 4mm scale gas lamps in brown (2x wall lamps, 6x street/platform lamps)

Pack Contents

• 6x 4mm scale street/platform lamps with 200mm connection wires
• 2x 4mm scale wall lamps with 200mm connection wires
• 8x Resistor boards – suitable for connection to regulated DC power 6-12V

Installation Advice
Drill the mounting hole using a 2mm drill. Carefully thread the fine wires into the hole, then insert the lamp mounting tube.
If using the extension base, use a 5.5mm drill and insert it to your chosen depth or pre-cut it to length and pre-drill to 2mm to allow you to use the added 2mm tube extension that is provided in the pack.
Wall lamps – using a very small drill, drill the building wall to allow insertion of the fine wires. Use glue to fix the lamp to the building.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
You can also connect Legacy Skyline Lamps to an Alpha Mimic DCC control board if you wish. Follow the instructions supplied with the Alpha Mimic Building Lighting for this type of installation.

Recommended Power Supply – DCP-PS12

Catalogue listing

DCC Concepts 4mm Scale Gas Lamps Value Pack – Brown (product code LML‑VPGBN) is a collection of super‑high‑quality LED gas lamps made to 4 mm scale, finished in a brown colour. The pack contains two wall‑mounted lamps and six street or platform lamps.

The pack includes:
- Six 4 mm scale street/platform lamps, each supplied with a 200 mm connection wire.
- Two 4 mm scale wall lamps, each supplied with a 200 mm connection wire.
- Eight resistor boards designed for use with a regulated DC supply of 6‑12 V.

Installation advice recommends drilling a 2 mm hole for the mounting tube, threading the fine wires through, and inserting the lamp. For the extension base a 5.5 mm drill is used, after which the extension tube provided in the pack can be inserted to the desired depth. Wall lamps require a small drill hole in the building wall and glue to secure the lamp. The longer of the two wires is the positive lead; connect the power supply to a resistor board and test the lamp with the supplied resistor values to achieve the preferred light level. Any 1/4 W resistor larger than 1 kΩ may also be used. Up to six lamps can be powered from a single resistor board. The lamps are compatible with Alpha Mimic DCC control boards when used with the Alpha Mimic Building Lighting system.

The manufacturer recommends the DCP‑PS12 power supply for optimal performance.