DCC Concepts LML-SWMR

4mm Scale Swan-Neck Wall Lamps – Maroon (2 pack)

Manufacturer catalogue image - please note that pre-release images may be CAD renders or CGI images rather than photographs

Manufacturer description

Super-high quality LED 4mm Scale swan-neck wall lamps in Maroon (2 pack)

Pack Contents

• 2x 4mm scale wall lamps with 200mm connection wires
• 2x Resistor boards – suitable for connection to regulated DC power 6-12V

Installation Advice
Using a very small drill, drill the building wall to allow insertion of the fine wires. Use glue to fix the lamp to the building.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
You can also connect Legacy Skyline Lamps to an Alpha Mimic DCC control board if you wish. Follow the instructions supplied with the Alpha Mimic Building Lighting for this type of installation.

Recommended Power Supply – DCP-PS12

Catalogue listing

DCC Concepts 4mm Scale Swan‑Neck Wall Lamps – Maroon (2 pack) are high‑quality LED accessories designed for 4mm model railway buildings. The product carries the manufacturer part number LML‑SWMR.

The pack contains two 4mm scale wall lamps, each supplied with a 200 mm connection wire, and two resistor boards suitable for connection to a regulated DC supply of 6 to 12 V.

Installation is carried out by drilling a small hole in the building wall to pass the fine wires, then fixing the lamp with glue. The longer of the two wires is the positive lead. The power supply is connected to the resistor board; different resistor values can be tested to achieve the desired illumination level. Any 1/4 watt resistor larger than 1 kΩ may be used. Up to six lamps may be linked to a single resistor board. The lamps can also be integrated with an Alpha Mimic DCC control board in accordance with the Alpha Mimic Building Lighting instructions.

The recommended power supply for this product is the DCP‑PS12.