DCC Concepts LML-SWBN

4mm Scale Swan-Neck Wall Lamps – Brown (2 pack)

Manufacturer catalogue image - please note that pre-release images may be CAD renders or CGI images rather than photographs

Manufacturer description

Super-high quality LED 4mm scale swan-neck wall lamps in Brown (2 pack)

Pack Contents

• 2x 4mm scale wall lamps with 200mm connection wires
• 2x Resistor boards – suitable for connection to regulated DC power 6-12V

Installation Advice
Using a very small drill, drill the building wall to allow insertion of the fine wires. Use glue to fix the lamp to the building.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
You can also connect Legacy Skyline Lamps to an Alpha Mimic DCC control board if you wish. Follow the instructions supplied with the Alpha Mimic Building Lighting for this type of installation.

Recommended Power Supply – DCP-PS12

Catalogue listing

DCC Concepts 4mm Scale Swan‑Neck Wall Lamps – Brown (2 pack) are high‑quality LED lighting units designed for 4mm scale railway buildings. The product carries the manufacturer part number LML‑SWBN.

Each pack contains two wall lamps with 200 mm of connection wire, together with two resistor boards suitable for regulated DC power supplies of 6‑12 V.

Installation is carried out by drilling a small hole in the building wall, inserting the fine wires and fixing the lamp with glue. The longer wire is the positive lead; the supplied resistor board is connected to a 6‑12 V power supply and the lamp is tested with the provided resistor values to achieve the desired brightness. Alternative 1 kΩ or higher ¼ watt resistors may be used, and up to six lamps can share a single resistor board. The lamps can also be linked to an Alpha Mimic DCC control board in accordance with the Alpha Mimic Building Lighting instructions. The recommended power supply for this product is the DCP‑PS12.