Back to product list

DCC Concepts LML-SSMR

4mm Scale Swan-Neck Street/Platform Lamps – Maroon (3 pack)

Manufacturer catalogue image - please note that pre-release images may be CAD renders or CGI images rather than photographs

Manufacturer description

Super-high quality LED 4mm scale swan-neck street/platform lamps in Maroon (3 pack)

Pack Contents

• 3x 4mm scale street/platform lamps with 200mm connection wires
• 3x Resistor boards – suitable for connection to regulated DC power 6-12V

Installation Advice
Drill the mounting hole using a 2mm drill. Carefully thread the fine wires into the hole, then insert the lamp mounting tube.
If using the extension base, use a 5.5mm drill and insert it to your chosen depth or pre-cut it to length and pre-drill to 2mm to allow you to use the added 2mm tube extension that is provided in the pack.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
You can also connect Legacy Skyline Lamps to an Alpha Mimic DCC control board if you wish. Follow the instructions supplied with the Alpha Mimic Building Lighting for this type of installation.

Recommended Power Supply – DCP-PS12

Catalogue listing

DCC Concepts 4mm Scale Swan‑Neck Street/Platform Lamps – Maroon (3 pack) is a set of super‑high‑quality LED lamps designed for 4mm (HO) model railway layouts. The product carries the manufacturer part number LML‑SSMR and provides three maroon swan‑neck lamps, each supplied with a 200 mm length of connection wire.

The pack also includes three resistor boards that are suitable for use with a regulated DC power supply of 6‑12 V. The resistor boards allow the user to adjust the illumination level by selecting different resistor values, and up to six lamps may be connected to a single board. The recommended power supply for this kit is the DCP‑PS12.

Installation guidance advises drilling a 2 mm hole for the mounting tube, threading the fine wires through the hole, and attaching the lamp. An optional extension base can be fitted using a 5.5 mm drill. The longer of the two wires is the positive lead, and a 1 kΩ or higher ¼‑watt resistor may be used to set the desired light output. The lamps can also be integrated with an Alpha Mimic DCC control board following the instructions supplied with that system.