DCC Concepts LML-SSBK

4mm Scale Swan-Neck Street/Platform Lamps – Black (3 pack)

Manufacturer catalogue image - please note that pre-release images may be CAD renders or CGI images rather than photographs

Manufacturer description

Super-high quality LED 4mm scale swan-neck street/platform lamps in Black (3 pack)

Pack Contents

• 3x 4mm scale street/platform lamps with 200mm connection wires
• 3x Resistor boards – suitable for connection to regulated DC power 6-12V

Installation Advice
Drill the mounting hole using a 2mm drill. Carefully thread the fine wires into the hole, then insert the lamp mounting tube.
If using the extension base, use a 5.5mm drill and insert it to your chosen depth or pre-cut it to length and pre-drill to 2mm to allow you to use the added 2mm tube extension that is provided in the pack.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
You can also connect Legacy Skyline Lamps to an Alpha Mimic DCC control board if you wish. Follow the instructions supplied with the Alpha Mimic Building Lighting for this type of installation.

Recommended Power Supply – DCP-PS12

Catalogue listing

DCC Concepts LML‑SSBK is a pack of three black swan‑neck street or platform lamps designed for 4 mm scale model railways. Each lamp features a high‑quality LED, a 200 mm wiring length and is supplied with a dedicated resistor board suitable for regulated DC power between 6 V and 12 V.

Installation instructions specify drilling a 2 mm hole for the mounting tube, with an optional 5.5 mm hole when using the supplied extension base. The longer of the two wires is the positive lead; the lamp can be tested with the various resistor values on the board to achieve the desired illumination level. Up to six lamps may be connected to a single resistor board, and the units are compatible with Alpha Mimic DCC control boards when used with the appropriate building‑lighting kit.

DCC Concepts recommends the DCP‑PS12 power supply for optimal performance. The pack also includes three resistor boards, allowing each lamp to be powered individually or grouped as required.