DCC Concepts LML-MSL

4mm Scale Modern Post Lamps – Grey (3 pack)

Manufacturer catalogue image - please note that pre-release images may be CAD renders or CGI images rather than photographs

Manufacturer description

Super-high quality 4mm scale LED modern post lamps (3 pack).
These lamps are found anywhere lighting is needed. Height is easily to adjust via a sliding base. They are grey to match the usual galvanised finish, but can easily be repainted.

Pack Contents

• 3x 4mm scale street/platform lamps with 500mm connection wires
• 3x Resistor boards – suitable for connection to regulated DC power 6-12V

Installation Advice
Drill the mounting hole using a 2mm drill. Carefully thread the fine wires into the hole, then insert the lamp mounting tube.
If using the extension base, use a 5.5mm drill and insert it to your chosen depth or pre-cut it to length and pre-drill to 2mm to allow you to use the added 2mm tube extension that is provided in the pack.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
You can also connect Legacy Skyline Lamps to an Alpha Mimic DCC control board if you wish. Follow the instructions supplied with the Alpha Mimic Building Lighting for this type of installation.

Recommended Power Supply – DCP-PS12

Catalogue listing

DCC Concepts 4mm Scale Modern Post Lamps – Grey (3 pack) – Manufacturer part number LML‑MSL.

The set contains three 4 mm‑scale LED post lamps designed for model railway street or platform lighting. Each lamp is supplied with a 500 mm length of connection wire and a resistor board suitable for regulated DC power supplies of 6–12 V. The lamps are finished in grey to match a galvanised appearance and can be repainted if desired. Height is adjustable by means of a sliding base.

Installation involves drilling a 2 mm hole for the mounting tube, threading the fine wires through, and optionally using the provided 5.5 mm extension base. The longer of the two wires is the positive lead; the resistor board allows selection of light intensity by trying different resistor values, or by using any 1/4 watt resistor greater than 1 kΩ. Up to six lamps may be connected to a single resistor board, and the lamps can also be linked to an Alpha Mimic DCC control board according to the manufacturer’s instructions.

The manufacturer recommends the DCP‑PS12 power supply for optimal performance.