DCC Concepts LML-GWMR
4mm Scale Gas Wall Lamps – Maroon (2 pack)
Manufacturer catalogue image - please note that pre-release images may be CAD renders or CGI/AI images rather than photographs
Manufacturer description
Super-high quality LED 4mm scale gas-style wall lamps in Maroon (2 pack)
Pack Contents
- 2x 4mm scale wall lamps with 200mm connection wires
- 2x Resistor boards – suitable for connection to regulated DC power 6-12V
Installation Advice
Using a very small drill, drill the building wall to allow insertion of the fine wires. Use glue to fix the lamp to the building.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
You can also connect Legacy Skyline Lamps to an Alpha Mimic DCC control board if you wish. Follow the instructions supplied with the Alpha Mimic Building Lighting for this type of installation.
Recommended Power Supply – DCP-PS12
Catalogue listing
Supplier Links
Supplier links are provided for your convenience and do not guarantee that the product is currently available. RailwayModels.uk is not a representative of these suppliers, but may receive a commission when purchases are made through links on this page.
DCC Concepts 4mm Scale Gas Wall Lamps – Maroon (2 pack) are high‑quality LED wall lamps produced in a 4mm modelling scale. The lamps are finished in a deep maroon colour and are designed for use with DCC‑controlled model railway buildings.
Each pack contains two wall lamps, each supplied with a 200 mm length of fine connection wire, and two resistor boards intended for connection to a regulated DC power source of 6‑12 V. The resistor boards allow the user to adjust the light output by selecting different resistor values; any 1/4‑watt resistor larger than 1 kΩ may be used. Up to six lamps can be linked to a single resistor board.
Installation is carried out by drilling a small hole in the model wall to thread the wires through, then fixing the lamp with glue. The longer wire is the positive lead. The recommended power supply for this product is the DCP‑PS12. The lamps can also be integrated with an Alpha Mimic DCC control board in accordance with the instructions supplied with Alpha Mimic Building Lighting.