DCC Concepts LML-GWGR

4mm Scale Gas Wall Lamps – Green (2 pack)

Manufacturer catalogue image - please note that pre-release images may be CAD renders or CGI images rather than photographs

Manufacturer description

Super-high quality LED 4mm scale gas-style wall lamps in green (2 pack)

Pack Contents

• 2x 4mm scale wall lamps with 200mm connection wires
• 2x Resistor boards – suitable for connection to regulated DC power 6-12V

Installation Advice
Using a very small drill, drill the building wall to allow insertion of the fine wires. Use glue to fix the lamp to the building.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
You can also connect Legacy Skyline Lamps to an Alpha Mimic DCC control board if you wish. Follow the instructions supplied with the Alpha Mimic Building Lighting for this type of installation.

Recommended Power Supply – DCP-PS12

Catalogue listing

DCC Concepts 4mm‑scale gas‑style wall lamps in green are supplied in a pack of two. The product carries the manufacturer part number LML‑GWGR and uses high‑quality LEDs to replicate gas‑lamp illumination at 4mm scale.

Each pack contains two wall lamps, each provided with a 200 mm connection wire, and two resistor boards suitable for use with a regulated 6‑12 V DC power source. The longer of the two wires on each lamp is the positive lead.

For installation, a very small drill is required to make holes in the building wall for the fine wires, after which the lamp can be fixed in place with glue. The power supply is connected to the resistor board, and different resistor values can be trialled to achieve the desired light level; any 1/4‑watt resistor larger than 1 kΩ may also be used. Up to six lamps may be linked to a single resistor board. Legacy Skyline lamps can be connected to an Alpha Mimic DCC control board according to the Alpha Mimic Building Lighting instructions. The recommended power supply is the DCP‑PS12.