DCC Concepts LML-GSMR

4mm Scale Gas Street/Platform Lamps – Maroon (3 pack)

Manufacturer catalogue image - please note that pre-release images may be CAD renders or CGI images rather than photographs

Manufacturer description

Super-high quality LED 4mm scale gas-style street/platform lamps in Maroon (3 pack)

Pack Contents

• 3x 4mm scale street/platform lamps with 200mm connection wires
• 3x Resistor boards – suitable for connection to regulated DC power 6-12V

Installation Advice
Drill the mounting hole using a 2mm drill. Carefully thread the fine wires into the hole, then insert the lamp mounting tube.
If using the extension base, use a 5.5mm drill and insert it to your chosen depth or pre-cut it to length and pre-drill to 2mm to allow you to use the added 2mm tube extension that is provided in the pack.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
You can also connect Legacy Skyline Lamps to an Alpha Mimic DCC control board if you wish. Follow the instructions supplied with the Alpha Mimic Building Lighting for this type of installation.

Recommended Power Supply – DCP-PS12

Catalogue listing

DCC Concepts LML‑GSMR is a set of three 4 mm scale gas‑style street or platform lamps in a maroon finish. The lamps are fitted with LED emitters and each comes with a 200 mm length of fine connection wire.

The pack also includes three resistor boards designed for regulated DC power supplies operating between 6 V and 12 V. The resistor boards allow users to adjust the lamp brightness by selecting different resistor values, with a minimum recommended resistance of 1 kΩ for ¼ watt resistors.

Installation involves drilling a 2 mm hole for the mounting tube, threading the wires through, and attaching the lamp. An optional extension base requires a 5.5 mm drill and additional 2 mm tube provided in the set. Up to six lamps may be connected to a single resistor board, and the lamps can also be linked to an Alpha Mimic DCC control board according to the supplied instructions. DCC Concepts recommends using the DCP‑PS12 power supply with this product.