DCC Concepts LML-GSGR

4mm Scale Gas Street/Platform Lamps – Green (3 pack)

Manufacturer catalogue image - please note that pre-release images may be CAD renders or CGI images rather than photographs

Manufacturer description

Super-high quality LED 4mm scale gas-style street/platform lamps in Green (3 pack)

Pack Contents

• 3x 4mm scale street/platform lamps with 200mm connection wires
• 3x Resistor boards – suitable for connection to regulated DC power 6-12V

Installation Advice
Drill the mounting hole using a 2mm drill. Carefully thread the fine wires into the hole, then insert the lamp mounting tube.
If using the extension base, use a 5.5mm drill and insert it to your chosen depth or pre-cut it to length and pre-drill to 2mm to allow you to use the added 2mm tube extension that is provided in the pack.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
You can also connect Legacy Skyline Lamps to an Alpha Mimic DCC control board if you wish. Follow the instructions supplied with the Alpha Mimic Building Lighting for this type of installation.

Recommended Power Supply – DCP-PS12

Catalogue listing

DCC Concepts 4mm Scale Gas Street/Platform Lamps – Green (3 pack) – part number LML‑GSGR. The set contains three 4 mm scale LED street or platform lamps finished in green, each supplied with a 200 mm length of fine connecting wire. Three resistor boards are also included; they are suitable for connection to a regulated DC supply of 6‑12 V.

Installation guidance advises drilling a 2 mm hole for the lamp mounting tube, threading the fine wires through the hole and inserting the tube. For use with the optional extension base a 5.5 mm hole is required, after which a 2 mm tube extension supplied in the pack may be added. The longer of the two wires is the positive lead. The lamp can be tested with each resistor value on the board to choose the preferred light level; any 1/4 watt resistor larger than 1 kΩ may also be used. Up to six lamps may be powered from a single resistor board, and the lamps can be linked to an Alpha Mimic DCC control board following the Alpha Mimic Building Lighting instructions.

The manufacturer recommends the DCP‑PS12 power supply for use with this lighting set.