Back to product list

DCC Concepts LML-GSBN

4mm Scale Gas Street/Platform Lamps – Brown (3 pack)

Manufacturer catalogue image - please note that pre-release images may be CAD renders or CGI images rather than photographs

Manufacturer description

Super-high quality LED 4mm scale gas-style street/platform lamps in Brown (3 pack)

Pack Contents

• 3x 4mm scale street/platform lamps with 200mm connection wires
• 3x Resistor boards – suitable for connection to regulated DC power 6-12V

Installation Advice
Drill the mounting hole using a 2mm drill. Carefully thread the fine wires into the hole, then insert the lamp mounting tube.
If using the extension base, use a 5.5mm drill and insert it to your chosen depth or pre-cut it to length and pre-drill to 2mm to allow you to use the added 2mm tube extension that is provided in the pack.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
You can also connect Legacy Skyline Lamps to an Alpha Mimic DCC control board if you wish. Follow the instructions supplied with the Alpha Mimic Building Lighting for this type of installation.

Recommended Power Supply – DCP-PS12

Catalogue listing

DCC Concepts 4 mm Scale Gas Street/Platform Lamps – Brown (3‑pack) – part number LML‑GSBN. The set contains three brown, 4 mm‑scale gas‑style street or platform lamps, each supplied with a 200 mm length of fine connection wire, and three resistor boards designed for use with regulated DC power in the range 6‑12 V.

The lamps are intended for model railway layouts. They are fitted by drilling a 2 mm hole for the mounting tube, threading the fine wires through, and securing the lamp. An optional extension base can be installed using a 5.5 mm hole and the additional 2 mm tube supplied. The longer of the two wires is the positive lead; the resistor board is connected to the power supply, and the lamp brightness can be adjusted by trying the different resistor values supplied or by using any 1/4 W resistor over 1 kΩ. Up to six lamps may be powered from a single resistor board, and the lamps can also be linked to an Alpha Mimic DCC control board following the Alpha Mimic Building Lighting instructions.

A suitable power source is the DCC Concepts DCP‑PS12 supply. The product is marketed as a super‑high quality LED lighting solution for 4 mm scale model railway street and platform applications.