DCC Concepts LML-GSBK

4mm Scale Gas Street/Platform Lamps – Black (3 pack)

Manufacturer catalogue image - please note that pre-release images may be CAD renders or CGI images rather than photographs

Manufacturer description

Super-high quality LED 4mm scale gas-style street/platform lamps in Black (3 pack)

Pack Contents

• 3x 4mm scale street/platform lamps with 200mm connection wires
• 3x Resistor boards – suitable for connection to regulated DC power 6-12V

Installation Advice
Drill the mounting hole using a 2mm drill. Carefully thread the fine wires into the hole, then insert the lamp mounting tube.
If using the extension base, use a 5.5mm drill and insert it to your chosen depth or pre-cut it to length and pre-drill to 2mm to allow you to use the added 2mm tube extension that is provided in the pack.
The longer of the 2 wires is the + lead. Connect your power supply to the resistor board and then try the lamp with each of the resistor values to select your preferred light level.
Alternatively, if a different level is wanted, you may also use any other value 1/4 watt resistor as long as it is larger than 1k Ohms.
Connect several lamps (up to 6) to one resistor board if you wish.
You can also connect Legacy Skyline Lamps to an Alpha Mimic DCC control board if you wish. Follow the instructions supplied with the Alpha Mimic Building Lighting for this type of installation.

Recommended Power Supply – DCP-PS12

Catalogue listing

DCC Concepts 4mm Scale Gas Street/Platform Lamps – Black (3‑pack) are high‑quality LED lamps designed for 4mm scale model railways. The product is supplied under the manufacturer part number LML‑GSBK.

The pack contains three black street or platform lamps, each with a 200 mm connection wire, and three resistor boards suitable for connection to a regulated DC power source of 6–12 V.

Installation requires drilling a 2 mm hole for the mounting tube; a larger 5.5 mm hole is needed if the optional extension base is used. The longer of the two wires is the positive lead. The lamps may be connected to the supplied resistor boards, with the ability to experiment with different resistor values to achieve the desired light level, or to use any 1/4 watt resistor over 1 kΩ. Up to six lamps can share a single resistor board. The lamps are also compatible with Alpha Mimic DCC control boards, following the instructions provided with that system. The recommended power supply is the DCC Concepts DCP‑PS12.