Cavalex Models BBA01 BX(1) 910236

Bauxite BBA Bogie Steel Wagon No.910236 (Exclusive)

Manufacturer catalogue image - please note that pre-release images may be CAD renders or CGI/AI images rather than photographs

Prototype Eras
Era 9 (1995 to 2004) Initial Privatisation
Era 10 (2005 to 2015) Rebuilding of the Railways
Era 11 (2016 to 2026) The Last Days of Privatisation

Manufacturer description

Exclusive running number, only available at Rails of Sheffield

Cavalex Models Bauxite BBA Bogie Steel Wagon No.910236

Built between 1973 and 1981, the BBA was a slightly longer version of the earlier BAA steel wagon but with a reduced 75 tonne capacity. The heavily constructed long steel carrier was designed to carry ingots, slabs, long lengths of steel, steel coil, and billets.

A prototype of the design was built at BR Shildon in 1973 and was 10ft longer than the earlier BAA type, with deeper solebars. Production followed at BR Ashford with over 500 wagons being built to two design codes: BB001B and BB001C.

Following production over an eight year period the wagon type became the principal steel carrying wagon on British Rail.

Early batches of the BBA were delivered in BR bauxite brown livery with black bogies, while the final batch of wagons wore the then new Railfreight black livery with red ends and side labels.

Once these wagons had entered service across the BR network they would usually be found mixed in with other types in block trains often with BAA wagons. The BBA could be seen in South Wales, the Midlands, the north east of England and Scotland. Operations were on trunk routes between steel production and finishing locations and industrial users.

The BBA has seen several modifications during its lifetime, primarily to allow the easier loading and unloading of strip coils. Variations have included the removal of the ends and the fitting of 5 transverse coil cradles, removal of the ends and floor and the fitting of coil boxes (BLA) and the fitting of telescopic sliding covers (BWA). Other TOPS codes applied have been BEA, BIA, BRA, BUA and BXA.

Between 1994 and 1995 over 250 BBA wagons were modified with the removal of the ends and floor and the fitting of coil boxes and recoded BLA. This was for steel strip coil traffic in south Wales for Dee Marsh, Llanwern, Trostre, and Ebbw Vale.

The BBA and shorter BAA have been the mainstay of the heavy steel carrying fleet since their introduction in the mid-1970s and can still be seen in service today.

Catalogue listing

Cavalex Models Bauxite BBA Bogie Steel Wagon No.910236 is a limited‑edition railway model released by Rails of Sheffield. It carries the exclusive running number 910236 and is identified by the manufacturer part number BBA01 BX(1) 910236. The model represents the British Rail BBA wagon as it appeared during the rebuilding of the railways, a period covering the late 1970s and early 1980s.

The real BBA wagons were built between 1973 and 1981 as a slightly longer version of the earlier BAA steel wagon, with a reduced 75 tonne capacity. Over 500 units were produced at BR Ashford to design codes BB001B and BB001C, becoming the principal steel‑carrying wagon on British Rail. Early examples were delivered in BR bauxite brown livery with black bogies, while later units carried the Railfreight black livery with red ends and side labels.

Throughout their working life the BBA wagons were modified for easier handling of strip coils, including the removal of end panels, addition of transverse coil cradles, coil boxes (recoded BLA) and telescopic sliding covers (recoded BWA). Between 1994 and 1995 more than 250 wagons were altered for steel strip coil traffic in South Wales. The BBA, together with the shorter BAA, has remained a core component of the heavy‑steel carrying fleet since its introduction and continues to be seen in service today.