Published on Thursday 6 April 2017 by Kathy Millatt

This is probably the easiest method for modelling around complex trackwork. I have used card, styrene and just loose grout. This method is easy to cut and does not distort with damp like card (mine has swelled over the years causing clearance issues).

It's simple because you can just press it down on the trackwork and then cut along the impressions. None of those nasty gaps left when you try and measure the uneven and irregular areas. Easy. It comes in grey, it's easy to trim in situ if you need to with a sharp knife blade and it has a great texture - what's not to love!

The only downsides are that it does dent easily and solvent based products will cause it to distort ruining all your hard work. That means you need water based glues, fillers and paint.

Materials

Craft foam - check the size but mine is around 2mm thick from HobbyCraft. It comes in A3 and A4 sheets so you can avoid too many joints.
White Glue
Sharp knife (I use a #11 X-acto blade but any one will do). They do blunt relatively quickly especially if you are trimming in situ so be prepared to sway your blade is trimming is not going well. It's also easier to trim if there is a paint layer on it.
Acrylic putty - I used Deluxe Materials.

Index

00:17 Real World
00:50 Method
11:25 Final Result
12:08 Mini Kathys

If you are enjoying the series then please subscribe to for the next weekly instalment.

http://www.kathymillatt.co.uk/blog/2017/04/06/how-to-model-tar…kwork-using-foam/

www.kathymillatt.co.uk
www.facebook.com/KathyMillattModelling/
twitter.com/kathymillatt
www.instagram.com/kathymillatt/
uk.pinterest.com/kathymillatt/
www.youtube.com/c/kathymillatt
www.flickr.com/photos/kathymillatt/

The video description and textual content is provided by the publisher of the video, and may contain external links. RailwayModels.uk has no connection with the sites linked to, and links are not checked before the video is published here.